Extra LARGE Coronary
Bio Active Stent (BAS)
pre-mounted on
rapid exchange PTCA
polyamide catheter

Based on the Helistent unique helicoidal and tubular structure design, Hexacath engineers have developed a new range of coronary stents to fit the interventional cardiologist's needs in term of Extra Large coronary vessels.

Technical specifications

Usable length: 140cm
Shaft diameter:
- Polytube 3F (1mm)
- Hypotube 1.9F (0.63mm)
Minimum guiding catheter diameter: 0.064" (1.62mm)
Maximum guide wire diameter: 0.014" (0.356mm)
Radio-opaques markers:
One at each end of stent
Material composition:
316L stainless steel
Coating: Titanium-NO

BIO ACTIVE COATING

Significant advantages

TITAN2 XLarge stents also benefits from the exclusive and proprietary Bio Active Coating Titanox (TM) which has proven efficacy in thrombotic environment. This new category of stent provides the specific solutions to stent extra large vessel diameters such as grafts (CABG) which are prone to thrombosis.

DEDICATED STENT PLATFORM

Specific design for large diameters

The TITAN2 XLarge stent has been developed to address the needs of extra large diameters. Its design provides increased strut thickness and width.

Profile

Lower stent profile and a 1.9F shaft delivery catheter combined into a high performance coronary stent system reducing friction and risk of gas embolism.

Scaffolding

The TITAN2 XLarge stent design provides better scaffolding for stenting in large or SVG vessels. Ratios of 18% and 17% in 4.5 and 5.0 mm diameters mean better support throughout the stented area.

Stent range

Lengths: 13, 16 and 19 mm
Diameters: 4.5 and 5.0 mm

Extra LARGE Coronary Bio Active Stent (BAS) pre-mounted on rapid exchange PTCA polyamide catheter